Refer to Wiring Diagram 10. . The Validation Server feature provides a way to reduce inconsistencies or inaccuracies in the data entered by a User. Electricity can cause death orinjury. Changes and technical updates will be added in subsequent editions of the documentation.
This option can be used to delay transmission of a fax job to an off-peak period to reduce the cost of the call. There are no parts behind these covers that you can maintain or service. . Electricity can cause death orinjury. Always determinethe cause of damage or overheating, and correct any potential hazards. SummaryThis section defines requirements for notification of health and safety incidents involving Xeroxproducts equipment and materials at customer locations. Pending JobsThis report shows specific information about document stored for delayed activity.
Verify the Embedded Fax feature installed on your machine. Inside the Device There is a Customer Replaceable Unit in the device, the Toner Cartridge 6. Always connect equipment to a correctly grounded power outlet. . Refer to Wiring Diagram 2.
Replacement is the reverse of the removal procedure. Check that the paper guides in all trays are correctly positioned. Moving parts can cause injury. Review and approve proposed product corrective actions and retrofits, if necessary. Refer to Wiring Diagram 1.
Determine the source of the problem. Electricity can cause death orinjury. The spring contacts supply the voltages to the print cartridge. Section 5 Parts ListThis section contains the detailed and illustrated spare parts list. . If the equipment is causing harm to the telephone network, the Telephone Company may request that you disconnect the equipment until the problem is resolved.
. If nec-essary, clean the spring contacts. . Move the pickup roll and the left idler to the left. Check the bypass tray retard pad. Check the document path for damage or obstructions.
The optimum test pattern to be used to diagnose the defect. To install the print drivers refer to Install Print Drivers on page 13. . Moving parts can cause injury. Use the General Accounts are used, all jobs go against that General Accounts and not the User Accounts. If themachine fails to switch on, go to step 9. Machine should be connected to the network via Ethernet Cable.
Most option screens include three buttons to confirm or cancel your choices. . Plastic bushes should be cleaned and lubricated. If you do not want to setup this service at this time continue on to Fax Setup on page 16. Refer to Wiring Diagram 6. .
Electricity can cause death orinjury. Electricity can cause death orinjury. If possible, connect the machine directly to a known good power supply. Input the size, type and color of the paper you have loaded and press Confirm. Refer to Table 1 to determine the possible cause of the defect. Switch on the power to the machine.
Electricity can cause death orinjury. Disconnect the power cord from the customersupply while performing tasks that do not need electricity. Disconnect the power cord from the customersupply while performing tasks that do not need electricity. AppleTalk Printing The Internet the machine. Electricity can cause death orinjury. Subnet Mask Address for the machine. Electricity can cause death orinjury.