These scanners can't monitor digital systems. Key Confirmation Tones - the scanner sounds a tone when you press a key, perform an operation correctly, and an error tone if you make an error. Press 1 to clear all, any other key aborts appears. Ok, I don't know how to listen to just them - they occationally pop up but so does a ton of other talk groups for the entire county. You will see a P before the channel number to show program mode. The maps that are Hybrid systems are in bold.
To Program Text for the Bank, see. Searching- the process of searching for active frequencies in pre-programmed service searches, programmed frequency bands, or the limit search. Trunking systems let a large group of 2-way radio users or even different groups of 2-way radio users efficiently use a set of frequencies. In Scan Mode 1st Line The banks that are selected for scanning will appear and the cursor will blink on the bank being scanned. After a transmission, the scanner automatically pauses for 2 seconds on this channel before proceeding to the next active transmission.
If you can't hear a control channel when you step through the trunking frequencies in manual mode , you either don't have all the frequencies or are too far away to receive the control channel and the system. The best one, in my opinion, is the ability to configure everything in the , on the computer, and then just shoot it to the radio with a one-way cable or back to the computer with a two-way cable. Since these size codes require multiple blocks, you will be prompted for the next available block. I dont really know what the hell I was doing but I saw them and saved them. I typically put my trunking frequencies in 1 trunking system per bank starting at the beginning of the banks because you probably won't have more than 25 of those, and then fill up the banks with conventional frequencies. In this page you find schematic, users and instructions manuals, service manuals, technical supplement, leaf leads and other good stuff. For complete warranty details and exclusions, check with your local RadioShack store.
Now, on the flip side, there are some pretty annoying things about these radios too. Any warranty support needed would be completed by the third party that sold the product. A Look at the Display The display has indicators that show the scanner's current operating status. The channel number moves upward one by one. The Pro-2096 only allows 12 characters of text where the 2055 allows for 16. Number Keys Enter a channel or a frequency; turn groups on and off in search mode; select which banks to scan in scanning mode; enter numbers or characters for programming text.
To Program Text for the Channel, see. Your scanner can receive transmissions that use these codes or more commonly referred to as tones. You can program the 97 and simply clone to the 2055. Thus, the warranty has been removed from this product. Group 012345 will appear while searching the Amateur band the cursor will blink on the current search group. If there is a dot instead of the + or -, then the bank is not on for scanning.
You should see the channel number in the top of the display and a P before the channel number to show program mode. You can then store the found code in the channel memory with one keystroke. Even though each controller monitors its own channel, one of the channel controllers is assigned to be a master that all controllers report to. HyperSearch and HyperScan - searches up to 100 steps per second and scans up to 50 channels per second. These are just my observations of the Pro-2055 that I owned. Simultaneous Trunk and Scan - scans conventional and trunked frequencies together at the same time.
It shows locking and unlocking ids while scanning and while in a bank. You just need to do it in the right place. Use and store the scanner only in normal temperature environments. Attenuation - lets you program your scanner per channel or globally to reduce the scanner's sensitivity to strong local signals or noise caused by these signals to reduce interference. Trunking systems in general allocate and use fewer frequencies among many different users.
Backlit Keypad and Display - select the time the light stays on or set to constant. Also has 3 programmable Skywarn channels. We are not against discussion of this issue. The scanner is fairly heavy because it has a metal case. There is no earlier warning system available that I know about. Key Lock - lets you lock the scanner's keys to help prevent accidental changes to the scanner's programming.