Brerrabbit Atlanta, Georgia 2011-01-10 Yes Excellent 4 This thermostat is exactly what I needed and was looking for. Viewing the Cool mode information is done in the same exact manner in Cool mode. Please save for future reference. Each sets the corresponding operating mode. Hang the top of the unit by the tabs at the top corners of the base, then snap the bottom of the unit into place. Just one step at a time and when you are done setting it up you will feel that it was worth it! Others lauded the ease of programming the system, saying they had it up and running in minutes, without consulting the manual.
Plus, you can set the filter change alert from 0 to 720 hours and the unit will tell you when the batteries need replacing. Some settings though, must be system should provide cool air after a short time. To do this hang the top of the unit by the tabs on the base, then snap the bottom of the unit into place. Verify that the system and its fan are 4. The beginning of a period may not be any closer to the beginning of the next period than one 15 minute increment.
Heat and Cool are programmed separately. It takes a few minutes to learn the programing but after that its a breeze. See battery location indicator that you should modify your program so and polarity in figure on Page 12. Save them for future reference. It also looks great on the wall where I can easily see the room temp and know where I'm at. Installing the thermostat itself just takes a screwdriver, a drill and a pair of batteries.
Over ride is simple as well. Setting and program changes can be made with the thermostat body on the wall, or removed from its base plate. The unit is easy to use and for the most part extremely user friendly. See jumper and switch positions figure on Page 12. Advertisement Print version Many people prefer to read the documents not on the screen, but in the printed version. The Lux model can easily be programmed to heat to a desired temperature in the morning, shut off, then cool to another temperature in the afternoon, saving energy and saving your money. If you do want the same times, one really great feature I like is the copy function.
It will remain illuminated for 15 seconds. Do save the book for future reference like the built in filter monitor that will need to be reset long after it is installed. They control the following: 7. The most important function I was looking for was the energy monitor that keeps track how many minutes each day the furnace runs. A thermostat can control systems with fewer stages, but must have at least as many hot and cold stages as the equipment. Verify that the system and its fan are operating properly.
Energizer ® is a registered trademark of Eveready Battery Company, Inc. Add to that the fact that conserving energy will also help extend the life of your heating or cooling system and this thoughtful feature is probably one of the most important gadgets you will ever buy. See jumper and switch positions figure on Page 12. Please return malfunctioning or defective units to the participating retailer from which purchase was made, along with proof of purchase. Energizer ® is a registered trademark of Eveready Battery Company, Inc. They control the following: 7.
To do this hang the top of the unit by the tabs on the base, then snap the bottom of the unit into place. This warranty does not cover damage by accident, misuse, or failure to follow installation instructions. The display will now show a adjustment value will be flashing. Steve the Hobby Handyman Michigan 2013-01-03 Yes Easy to set up. Do not use this item for any installation or repair of potable water applications.
Record your settings and programs before pressing this button. Note the letters printed near the terminals. When the thermostat is locked, a three digit code is set 000 to 999. Most are snap-ontypes and simply pull off. To change a switch position move switch down or up.