The disengaging lever 1 is located on the rear right-hand side of the scooter. Batteries for cyclic use are designed, in contrast to starter batteries as used in cars, so that they deliver continuous energy over a longer period of time and allow a considerable number of charging phases. If the throttle levers touch the seat, remove the throttle levers. Handle Handle Press the drive lever 1 in the direction of travel until the required speed has been reached. If you are not sure, you should try to get help from a second person if possible or contact your dealer. The seat height h is adjusted using the five holes 1-5 in the seat support.
Fitting the rear wheel: Locating the axle key Place the key 5 in the slot in the drive. We have placed great value on the simplest possible operation and long service life in both construction and material selection. Installation is in the reverse order of removal. Now available in 5 stunning colours. Driving Operate the drive lever slowly until the required speed has been reached The drive lever position controls the speed variably right up to maximum driving speed.
. Removing the battery case 22 Ah batteries can be recognized because the battery case 1 is a single unit Remove the battery case upwards out of the scooter chassis. Remember there is a 2t and a 4t version of the kymco vitality and the spark plugs are different. Cookies are small text files that are stored on your computer to save your preferences, and in some cases allow this website to function correctly. Your phone number required Which scooter are you interested in? Tip over sensor needs a reset. Only use the original battery charger included in delivery.
You may not use wet cell batteries with detachable cover caps. Danger due to unintentional movement! Place the scooter on supports. It may run 130 m at 8° incline. The controller is ready to drive. If you are not sure, you should try to get help from a second person if possible or contact your dealer. The tiller can be variably adjusted.
It may run 75 m at 8° incline. You should, however, only carry out such work if you are used to working with the tools described here since it is impossible to fully prevent injury hazards when handling tools. Remove the chassis Reassembling the ForU Stages 4 to 1 The ForU dismantled: 1. Removing the battery case 1. There are no plugs or wires to dismantle, so you can strip this scooter in seconds to transport in the boot. Ensure that the tiller is engaged properly by moving slightly forwards and backwards 13.
There are no plugs or wires to dismantle, so you can strip this scooter in seconds to transport in the boot. We will call you back within 1 hour during business hours. If you do not wish to receive these cookies, you must change your internet browser settings to reject cookies from this website. We respect your privacy and don't share the information your provide to us with anyone else. Engaging It is imperative that you observe the sequence for connecting and disconnecting the battery charger. Description This scooter is available on the Motability scheme for a weekly payment of £16. They will have the necessary tools and experience to service your scooter correctly.
This lightweight compact model boasts a whole host of exciting features. If the payload is less than 136kg. Neogating kerbs needs some practice. Approach at a right angle Approach the kerb at a right angle. The seat must be removed from the scooter in order to adjust the seat height. Starter armature or field coils have failed.