Follow the local laws and regulations in your area for computer battery disposal. External component identification Right-sidecomponents Item Component Function 1 Optical drive Reads optical discs and, on select models, also writes to optical discs. Item Component Description 1 Product name This is the product name affixed to the front of your computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. Handle flex cables with extreme care; these cables tear easily.
If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. In light of the current deluge of , you'd be forgiven for thinking miniature are the only option if you're on a tight budget. Removal and replacement procedures The following table shows how humidity affects the electrostatic voltage levels generated by different activities. Release the power cable from the base enclosure 1. Disconnect all external devices connected to the computer.
The edge of the module opposite the slot rises away from the computer. Remove the following screws: a. Disposal of mercury may be regulated because of environmental considerations. If the computer has stopped responding and Windows® shutdown procedures are ineffective, press and hold the power button for at least 5 seconds to turn off the computer. Remove the following components: a.
To prevent damage to the display assembly, support it before removing the screws. Summary of the content on the page No. The webcam module is available using spare part number 488385-001. To copy the entire screen, press fn+ prt sc. Summary of the content on the page No. Power cord set fittings appliance coupler and wall plug must bear the certification mark of the agency responsible for evaluation in the country or region where it will be used. Recovery discs are used to start up boot your computer and restore the operating system and software programs to factory settings in case of system failure or instability.
The software allows the creation of only one set of recovery discs. Battery Description Spare part number 6 cell, 2. The trackpad is sunk into the smooth and somewhat slippery wrist rest, and, during testing, we found it to be slightly temperamental -- the cursor would occasionally leap across the screen at the lightest touch or not respond at all. It is normal for the internal fan to cycle on and off during routine operation. On models with two hard drives, this menu option is called the Primary Hard Disk Self Test. There are as many as 82 screws, in 10 different sizes, that must be removed, replaced, or loosened when servicing the computer.
Reverse this procedure to install a memory module. Removal and replacement procedures Audio board Description Spare Part Number Audio board 489120-001 Before removing the audio board, follow these steps: 1. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface, such as pillows or rugs or clothing, to block airflow. Remove the display assembly: 1. Turn the display panel upside down.
Touchpad driver for Vista: Touchpad driver for Windows 7: Posted on Mar 09, 2010. The display inverter is available using spare part number 486556-001. Windows logo key Displays the Windows Start menu. The utility reports information about the computer and provides settings for startup, security, and other preferences. This feature helps you reinstall a program or driver without performing a full system recovery. A wireless network must be set up in order to establish a wireless connection. Remove all screw covers 1 and screws 2 that secure the display bezel to the display assembly.
The hard drive cover is included in the Plastics Kit, spare part number 489112-001. There are no flashy lights, no zany patterns and just a single shortcut button, which switches Wi-Fi on and off. The next time you open Recovery Manager, you will be prompted to continue the disc creation process. Recovery Manager works from a dedicated recovery partition select models only on the hard drive or from recovery discs you create. For optimal transmission, keep the areas immediately around the antennae free from obstructions.