Follow steps 1-3 in To play the outgoing announcement on this page to play back the current announcement. . Priority call You may choose to give your priority code see Feature summary on page 15 to someone special so you know when they are calling. Tabletop to wall-mount installation To install the telephone base Summary of the content on the page No. Hold down the switch hook on the telephone base, then slide the handset tab upwards to remove it from the slot. The announcement message is not clear. For example, if two calls have been received, the call with the entry number 02 in the call history is the more recent one.
You must use the supplied power adapter to use most features of this telephone. Route the telephone line cord through the slot. While using the menu, press to scroll through the settings page 15. In this case, you need to delete some messages page 46 and then record your new outgoing announcement. See Message playback on page 46 for instructions on playback and deletion. For cust Summary of the content on the page No. For calls within your area code: You dial: 7 digits.
Message playback To delete all old messages Use this feature to delete all old messages. Remote commands Play back all Press to play back all messages. You must use the supplied power adapter to use most features of this telephone. If you want to quickly view the content of pages found on the following pages of the manual, you can use them. Deleting call history entries To delete a call history entry Use the following steps to delete a call history entry. To review call history Use the following steps to review the call history. Rotate the handset tab 180 degrees.
Plug the large end into an electrical outlet not controlled by a wall switch. Bundle the telephone line cord and secure it with a twist tie. Press after the telephone plays the day and time the current message was received to repeat the message. Key tone Beeeep Command of the answering system is completed successfully. Appendix Troubleshooting If you have difficulty with your telephone, please try the suggestions below. Contact your telephone service provider charges may apply.
Refer to Priority call on page 49 for details. They are saved, played back and deleted exactly like incoming messages. To obtain warranty service in the United States of America, visit www. The elapsed time in seconds, 0-59 appears on the message window while recording. Press Whil Summary of the content on the page No.
You can access the answering system from a remote touch-tonetelephone. You can also visit our website at www. It is normal if the telephone takes a second or two before producing a dial tone. Plug one end of the telephone line cord into the Summary of the content on the page No. Message window displays The message window usually displays the total number of messages.
The telephone does not ring when there is an incoming call. . Flashes when there is an incoming call. Cut it out and keep it in your wallet for quick reference. For Customer Service, or to purchase accessories or replacement parts, visit our website at www. Key tone Beeeep Command of th Summary of the content on the page No.
Lift and rotate the bracket and lock it into tabletop position as indicated below. In Canada, dial 1 866 288-4268. While entering names or numbers , press to backspace and erase. Hold down the switch hook on the telephone base, then slide the handset tab upwards to remove it from the slot. Enter the remote commands see Remote commands on this page.